
© Agilent Technologies2000–2003 Agilent 3070 / 79000 DUT Power Supply Installation 40
Installing DUT Power Supplies
Figure 18 6624A rear mounting bracket
4 Mount a rack mount ear on the front of the 6624A
power supply on the side with the handle removed.
The other rack mount ear included in the kit will not
be used.
5 Install the 6624A in the outside most location, shown
in
Figure 18 on page 40 by setting the power supply
in the outside slot and using two screws to secure the
mounting bracket to the cradle DUT mounting
support.
6 Using a #1 Pozidriv screwdriver and 2 dress screws
(0570-1366), secure the 6624A to the cradle DUT
mounting support using the rack mount ears, as
shown in
Figure 16 on page 38.
7 If additional supplies require mounting, use the
mounting instructions for that power supply. If no
additional DUT supplies are to be mounted, reinstall
mounting bracket number #1. The correct mounting
of mounting bracket #1 is shown in
Figure 14 on
page 36.
Cradle DUT
Mounting Support
Power
plug
Mounting
Bracket
Mounting Screws
Comentarios a estos manuales