Agilent Technologies 6634A Manual de usuario descargar pdf (Pagina 56)

Connecting the DUT Power Supply Cables

2 If you are using ASRU Card channels 1 through 4,

connect the 6621A so output 2 goes to channels 5 and

6 in the higher numbered module, and output 1 goes

to channels 5 and 6 in the lower numbered module in

the same bank. It is possible that there will not be

enough ASRU Card channels available to use both of

the power supply outputs. To connect all of the

outputs, two cables are necessary since the outputs

will go to two modules. Use two E4000-61602 cables

for a 307X system or two E4000-61606 cables for a

317X system and connect the cables as shown in

Figure 24 on page 54.

NOTE

A 6621A can not be connected to ports 5 and 6 in

a 327X system.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Sin comentarios

Agilent Technologies 6634A Manual de usuario Pagina 56