Agilent Technologies 81134A Manual de servicio descargar pdf (Pagina 43)

OUTPut Commands SCPI Commands Reference

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 43

:OUTPut[0|1|2][:STATe]

Syntax

:OUTP[0|1|2][:STAT][?]

Form Set & Query

Description Switches the trigger output and channel outputs on or off, where 0

is the trigger output.

For the two channel outputs, both OUTPUT and OUTPUT are

switched simultaneously. In query form, OFF is returned only if

both OUTPUT and

OUTPUT are off. They can be controlled

separately from the front panel, or by adding

:POS

:NEG

to the

command.

Parameter ON|OFF|1|0

*RST value OFF

Example Switch on the channel 1 outputs.

:OUTP1 ON

:OUTPut[1|2]:NEG

Syntax

:OUTP[1|2]:NEG[?]

Form Set & Query

Description Switches the specified channel OUTPUT on or off.

Parameter ON|OFF|1|0

*RST value OFF

Example Switch off the channel 1 OUTPUT.

:OUTP1:NEG OFF

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 103 104

Sin comentarios

Agilent Technologies 81134A Manual de servicio Pagina 43