Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manual de servicio descargar pdf (Pagina 657)

100

101

:TRIGger Commands 28

Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 657

:TRIGger[:EDGE]:COUPling

(see page 860)

Command Syntax

:TRIGger[:EDGE]:COUPling <coupling>

<coupling> ::= {AC | DC | LFReject}

The :TRIGger[:EDGE]:COUPling command sets the input coupling for the

selected trigger sources. The coupling can be set to AC, DC, or LFReject.

• AC coupling places a high- pass filter (10 Hz for analog channels, and

3.5 Hz for all External trigger inputs) in the trigger path, removing dc

offset voltage from the trigger waveform. Use AC coupling to get a

stable edge trigger when your waveform has a large dc offset.

• LFReject coupling places a 50 KHz high-pass filter in the trigger path.

• DC coupling allows dc and ac signals into the trigger path.

Query Syntax

:TRIGger[:EDGE]:COUPling?

The :TRIGger[:EDGE]:COUPling? query returns the current coupling

selection.

Return Format

<coupling> ::= {AC | DC | LFR}

See Also • "Introduction to :TRIGger Commands" on page 641

• ":TRIGger:MODE" on page 648

• ":TRIGger[:EDGE]:REJect" on page 659

NOTE

The :TRIGger[:EDGE]:COUPling and the :TRIGger[:EDGE]:REJect selections are coupled.

Changing the setting of the :TRIGger[:EDGE]:REJect can change the COUPling setting.

1 2 ... 652 653 654 655 656 657 658 659 660 661 662 ... 969 970

Comentarios a estos manuales

Sin comentarios

Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manual de servicio Pagina 657

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Agilent Technologies InfiniiVision 3000 DSO-X 3054A