Agilent Technologies 1100 Series Guía de instalación descargar pdf (Pagina 13)

1100 LC Modules Control Manual - 13 - 03-914947-30:Rev.6

Communications Parameter Group

Master module HPIB Address:

Select this option if the HPLC chain is controlled via a GPIB

communication and enter the GPIB address of the Master

module.

NOTE: To check the GPIB address value of the Master module, refer to the Appendix at

the end of this manual.

HPIB Hardware:

If the HPLC chain is controlled via a GPIB communication, select

the name of the bus previously configured in the HPIB Hardware

scrolling list.

NOTE: For more details about the Bus configuration, refer to the Configuring the

Communication Server section in this manual.

Master module IP Address:

Select this option if the chromatograph is controlled via Ethernet

communication and type the IP address of the instrument.

Settings Parameter Group

Check the Thermostat Option installed check box if the

autosampler is thermostated.

In the Syringe size scrolling list, select the syringe type. Four

choices are available: 8 µL, 40µL, 100 µL or 400 µL.

In the Seat capillary scrolling list, select the seat type. Seven

choices are available: 0.3 µL, 0.7 µL, 1.2 µL, 2.3 µL, 400 µL,

1400 µL or 5000 µL.

In the Loop capillary scrolling list, select the Loop type. Four

choices are available: 8 µL, 80 µL, 200 µL and 1800 µL.

In the Trays scrolling lists, select the type of trays installed in the

autosampler. Five choices are available: None, 15 vials, 40 vials,

100 vials and Well Plate.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 183 184

Sin comentarios

Agilent Technologies 1100 Series Guía de instalación Pagina 13