Agilent Technologies 1100 Series Manual de instrucciones descargar pdf (Pagina 186)

176 1100 Series Capillary LC System Manual

A Safety Information

General

This is a Safety Class I instrument (provided with terminal for protective

earthing) and has been manufactured and tested according to international

safety standards.

Operation

Before applying power, comply with the installation section. Additionally the

following must be observed.

Do not remove instrument covers when operating. Before the instrument is

switched on, all protective earth terminals, extension cords,

auto-transformers, and devices connected to it must be connected to a

protective earth via a ground socket. Any interruption of the protective earth

grounding will cause a potential shock hazard that could result in serious

personal injury. Whenever it is likely that the protection has been impaired,

the instrument must be made inoperative and be secured against any intended

operation.

Make sure that only fuses with the required rated current and of the specified

type (normal blow, time delay, and so on) are used for replacement. The use of

repaired fuses and the short-circuiting of fuseholders must be avoided.

Do not operate the instrument in the presence of flammable gases or fumes.

Operation of any electrical instrument in such an environment constitutes a

definite safety hazard.

Do not install substitute parts or make any unauthorized modification to the

instrument.

WARNING

Any adjustment, maintenance, and repair of the opened instrument under voltage is

forbidden.

WARNING

Disconnect the instrument from the line and unplug the power cord before

maintenance.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 195 196

Sin comentarios

Agilent Technologies 1100 Series Manual de instrucciones Pagina 186