Agilent Technologies 1100 Series Manual de servicio descargar pdf (Pagina 232)

232 1100 Series DAD and MWD Reference Manual

6 Introduction to the Detector

Electrical Connections

• The GPIB connector is used to connect the detector with a computer. The

address and control switch module next to the GPIB connector determines

the GPIB address of your detector. The switches are preset to a default

address (see “GPIB Default Addresses” on page 262) which is recognized

once after power is switched on.

• The CAN bus is a serial bus with high speed data transfer. The two

connectors for the CAN bus are used for internal Agilent 1100 Series

module data transfer and synchronization.

• Two independent analog outputs provide signals for integrators or data

handling systems.

• The interface board slot is used for external contacts and BCD bottle

number output or LAN connections.

• The REMOTE connector may be used in combination with other analytical

instruments from Aligent Technologies if you want to use features such as

start, stop, common shut down, prepare, and so on.

• With the appropriate software, the RS-232C connector may be used to

control the detector from a computer through a RS-232C connection. This

connector is activated and can be configured with the configuration switch

next to the GPIB connector (see “Communication Settings for RS-232C

Communication” on page 263). See your software documentation for

further information.

• The power input socket accepts a line voltage of 100 – 120 V or

220 – 240 V AC ± 10 % with a line frequency of 50 or 60 Hz. Maximum

power consumption is 300 VA/125 W. There is no voltage selector on your

detector because the power supply has a wide-ranging capability. There are

no externally accessible fuses, because automatic electronic fuses are

implemented in the power supply. The security lever at the power input

socket prevents that the detector cover is taken off when line power is still

connected.

WARNING

Never use cables other than the ones supplied by Aligent Technologies to ensure

proper functionality and compliance with safety or EMC regulations.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 317 318

Sin comentarios

Agilent Technologies 1100 Series Manual de servicio Pagina 232