Agilent Technologies 8000 Series Manual del operador Pagina 52
- Pagina / 126
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
52 8000 Operator’s Manual
4 Operating the 8000
4 Calib. Compl Alarm Use this option to set an alarm to sound when autocalibration is complete and all
lines are purged.
Select option 4, Calib. Compl Alarm. Select option 1 to enable or option 2 to
disable the alarm. The Set Clock and Alarms screen displays.
Press any key to silence the alarm after it sounds.
Note: This option is only available if your system configuration includes the
peristaltic pump.
5 Prg Compl Alarm Use this option to set an alarm to sound at the end of the program. It is a useful
reminder that the program is complete.
Select option 5, Prg Compl Alarm. Select option 1 to enable or option 2 to disable
the alarm. The Set Clock and Alarms screen displays.
Press any key to silence the alarm after it sounds.
6 Start Output Delay Note: Option 6 displays only when the syringe pump is enabled.
If the syringe pump is enabled, use this option to set the delay from the start of a
program until the TTL signal is sent from the START OUTPUT jack on the 8000
rear panel.
Select option 6, Start Output Delay. The Start Output Delay screen displays. Enter
a delay length of up to 99:59 minutes for the 8000 TTL output and press ENTER.
The Set Clock and Alarms screen displays.
Note: This output signal can be used to start other instrumentation, such as a
dissolution apparatus, after the program on the 8000 is started. The default delay is
00:00, indicating that the signal will be sent at the moment a program starts. For
example, a value of 10:00 delays the signal for ten minutes after the program
starts. Set the value to 00:00 to eliminate the delay feature.
When the syringe pump is disabled, this option displays under the Main Menu.
See “3 Start Output Delay (peristaltic pump)” on page 49.
Table 4 Set Clock and Alarms Options (Apparatus 1 / 2)
Option Function
- Agilent 8000 1
- Dissolution Sampling 1
- Contents 3
- 4 8000 Operator’s Manual 4
- 8000 Operator’s Manual 5 5
- 6 8000 Operator’s Manual 6
- 8000 Operator’s Manual 7 7
- 8 8000 Operator’s Manual 8
- 8000 Operator’s Manual 9 9
- 10 8000 Operator’s Manual 10
- Electrical Hazards 12
- Information Symbols 14
- Introduction 15
- 8000 with Peristaltic Pump 17
- CC1234xxxx 18
- Setting Up the 8000 19
- Unpacking Your 8000 21
- Installation 22
- Setup of 8000 and Components 34
- Installing the Sample Tray 36
- (Peristaltic Pump only) 37
- Installing the RM Module 38
- External Unit 39
- Hidden Key Functions 41
- 42 8000 Operator’s Manual 42
- 3 Setting Up the 8000 42
- Table 1 Hidden Key Functions 42
- Setting Up the 8000 3 43
- 8000 Operator’s Manual 43 43
- 44 8000 Operator’s Manual 44
- Operating the 8000 45
- 8000 Keypad Options 46
- Operating the 8000 4 47
- 8000 Operator’s Manual 47 47
- Main Menu 48
- 8000 Operator’s Manual 49 49
- 50 8000 Operator’s Manual 50
- 52 8000 Operator’s Manual 52
- 54 8000 Operator’s Manual 54
- 56 8000 Operator’s Manual 56
- 60 8000 Operator’s Manual 60
- Creating a Sample Program 61
- 8000 Operator’s Manual 63 63
- 64 8000 Operator’s Manual 64
- SAMPLE TIME POINT: 000:02 65
- Starting a 8000 Program 66
- 68 8000 Operator’s Manual 68
- DISSO Options Screen 69
- 70 8000 Operator’s Manual 70
- 8000 Operator’s Manual 71 71
- 8000 Operator’s Manual 73 73
- 8000 Operator’s Manual 75 75
- 76 8000 Operator’s Manual 76
- 78 8000 Operator’s Manual 78
- 82 8000 Operator’s Manual 82
- ON R-M PUMP displays 84
- 8000 Operator’s Manual 85 85
- 88 8000 Operator’s Manual 88
- 8000 Operator’s Manual 89 89
- Starting a Program 91
- APP 3/7 Options Screen 93
- 94 8000 Operator’s Manual 94
- Table 2 4 App 3/7 Options 94
- Manual Sample 95
- 96 8000 Operator’s Manual 96
- Automatic Calibration 97
- 1 MANUAL 2 AUTOMATIC 98
- Manual Calibration 99
- Daisy Chaining 102
- 104 8000 Operator’s Manual 104
- 4 Operating the 8000 104
- Agilent Technologies 105
- Preventive Maintenance 106
- Apparatus 3 / 7 107
- Start Immediately 108
- Programmed Clean 108
- Apparatus 1 / 2 111
- Syringe and Seal Replacement 112
- Cleaning the Syringes 113
- Filter Changer (optional) 115
- Report Center Impact Printer 119
- Replacing a Paper Roll 120
- Toggling Your Printer Online 121
- Printer Self Test 121
- Printer Configuration 122
- 124 8000 Operator’s Manual 124
- 8000 Operator’s Manual 125 125
- 126 8000 Operator’s Manual 126
Relacionado con productos y manuales para Impresión y escaneo Agilent Technologies 8000 Series
(82 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.106 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales